DATA LIST / ACTIVE TEST
System information · Vehicles built from Nov 2005
| READ DATA LIST |
- HINT:
- Using the intelligent tester's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Select the following menu items: Body / Combination Meter / Data List.
Check the results by referring to the table below.
Combination meter Item
Measurement Item / Display (Range)
Normal Condition
Diagnostic Note
+B Voltage Value
Vehicle battery voltage / Min.: 0 V, Max.: 25.5 V
11 to 14 V
-
Vehicle Speed Meter
Vehicle speed / Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph)
Almost same as actual vehicle speed (When driving)
-
Engine Rpm
Engine speed / Min.: 0 rpm, Max.: 12,750 rpm
Almost same as actual engine speed (When engine is running)
-
Fuel Input (A/D)
Fuel input signal / Min.: 0, Max.: 255
Fuel gauge indicates (F): 33
Fuel gauge indicates (3/4): 98
Fuel gauge indicates (1/2): 144
Fuel gauge indicates (1/4): 179
Fuel gauge indicates (E): 206
-
Coolant Temperature
Coolant temperature / Min.: 0°C (32°F), Max.: 127.5°C (261.5°F)
After warning up: 80 to 95°C (176 to 203°F)
If the value is "0°C (32°F)" or "127.5°C (261.5°F)", sensor circuits are open or shorted.
ODO / TRIP Change SW
ODO / TRIP switch / ON or OFF
ON: Switch is pushed
OFF: Switch is released
-
Tail Cancel SW
TAIL CANCEL switch / ON or OFF
ON: Tail cancel available
OFF: Tail cancel unavailable
-
Tail Relay SW
Illumination switch / ON or OFF
ON: Tail switch ON
OFF: Tail switch OFF
-
P-Seatbelt Buckle SW
Front passenger side seat belt / ON or OFF
ON: Seat belt fastened
OFF: Seat belt not fastened
-
Rheostat value (A/D)
Light control rheostat volume / Min.: 0, Max.: 255
Light control rheostat Min. position: 0
Light control rheostat Max. position: 255
-
Quantity of Outside Light
Outside light control output / Min.: 0%, Max.: 100%
Current vehicle condition is displayed
-
Ambient Temperature (A/D)
Outside temperature input / Min.: 0, Max.: 255
Current outside temperature conditions
40°C (104°F): 78
25°C (77°F): 98
0°C (32°F): 135
-
Seat-belt Warning Buzzer
Seat belt warning buzzer / D/P ON, D ON, P ON or D/P OFF
D/P ON: Driver and passenger buzzer ON
D ON: Driver buzzer ON
P ON: Passenger buzzer ON
D/P OFF: Driver and passenger buzzer OFF
Current vehicle condition is displayed
Number of Trouble Code
Number of diagnosis codes / Min.: 0, Max.: 255
-
-
Communication ECM/Meter DTC
DTC is displayed
-
-
ODO (History 1)
Value when DTC is output / Min.: 0 km, Max.: 999999 km
-
-
ODO (History 2)
Value when DTC is output / Min.: 0 km, Max.: 999999 km
-
-
ODO (History 3)
Value when DTC is output / Min.: 0 km, Max.: 999999 km
-
-
Communication ABS/Meter DTC
DTC is displayed
-
-
ODO (History 1)
Value when DTC is output / Min.: 0 km, Max.: 999999 km
-
-
ODO (History 2)
Value when DTC is output / Min.: 0 km, Max.: 999999 km
-
-
ODO (History 3)
Value when DTC is output / Min.: 0 km, Max.: 999999 km
-
-
| PERFORM ACTIVE TEST |
- HINT:
- Performing the intelligent tester's Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Select the following menu items: Body / Combination Meter / Active Test.
Perform the Active Test by referring to the table below.
Item
Test Details
Diagnostic Note
Speed Meter Operation
0 / 40 / 80 / 120 / 160 / 200 / 240 km/h
Value selected during Active Test is displayed
TachoMeter Operation
0 / 1,000 / 2,000 / 3,000 / 4,000 / 5,000 / 6,000 / 7,000 rpm
Value selected during Active Test is displayed
Fuel Meter Operation
EMPTY / 1/2 / FULL
Value selected during Active Test is displayed
Water Temperature Meter Operation
LOW / NORMAL / HIGH
Value selected during Active Test is displayed
A/T Indicator Operation 1
P / R / N / D / 4 / 3 / 2 / L
Position selected during Active Test illuminates
Indicat. Lamp Beam
BEAM indicator light
ON / OFF
-
Indicat. Lamp Tail
TAIL indicator light
ON / OFF
-
Indicat. Lamp Fr FOG
Fr FOG indicator light
ON / OFF
-
Indicat. Lamp Rr FOG
Rr FOG indicator light
ON / OFF
-
Indcat. Lamp Airbag
AIRBAG warning light
ON / OFF
-
Indicat. Lamp D-seat Belt
D-SEAT BELT indicator light
ON / OFF
-
Indicat. Lamp P-seat Belt
P-SEAT BELT indicator light
ON / OFF
-
Indicat. Lamp Doors All Open
DOOR warning light
ON / OFF
w/o Multi-information display
Indicat. Lamp Fuel
FUEL warning light
ON / OFF
-
Indicat. Lamp Charge
CHARGE warning light
ON / OFF
-
Indicat. Lamp ABS
ABS warning light
ON / OFF
-
Indicat. Lamp Slip
SLIP indicator light
ON / OFF
-
Indicat. Lamp VSC
VSC warning light
ON / OFF
w/o Multi-information display
Indicat. Lamp 4WD
4WD indicator light
ON / OFF
-
Indicat. Lamp Brake
BRAKE warning light
ON / OFF
-
Indicat GLOW
Engine preheating indicator light
ON / OFF
for Diesel engine
A/T Oil Temperature Operation
A/T OIL indicator light
ON / OFF
w/o Multi-information display
Indicat. EPS
P/S indicator light
ON / OFF
-
Indicat. Lamp Cruise
CRUISE indicator light
ON / OFF
-
Master Warning
Master warning light
ON / OFF
-
Indicat. 4WD Lock
DIF. LOCK indicator light
ON / OFF
-
Indicat. Auto LSD
AUTO LSD indicator light
ON / OFF
w/o Multi-information display
Indicat. DAC
Downhill assist control indicator light
ON / OFF
-