2005-2008 RAV4 · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Aug 2007

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. INSTALL DOOR CONTROL RECEIVER

B132568
  1. Install the receiver with the bolt.

  1. Connect the receiver connector.


2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

B137548
  1. Attach the 7 clips to install the garnish.


3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

  1. B129707
    Install the belt hanger to the trim board.

  1. Attach the 4 clips and 5 claws to install the trim board.

  1. Install the 2 screws and 2 bolts.

  1. B137547
    Connect the rear No.1 seat belt's floor anchor.

    1. Connect the floor anchor with the bolt.

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    2. Install the anchor cover.


4. INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY

  1. B137550
    Install the tether anchor bracket with the bolt.


5. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL RH

  1. B135482
    Attach the 6 claws to install the bezel.


6. INSTALL REAR FLOOR FINISH PLATE

  1. B129704
    Attach the 2 claws and 6 clips to install the finish plate.


7. INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE

B129705
  1. Attach the 7 clips to install the side plate.

  1. Install the 4 screws.


8. INSTALL REAR FLOOR NO. 3 BOARD

9. INSTALL REAR FLOOR NO. 2 BOARD

10. INSTALL DECK BOARD ASSEMBLY

11. INSTALL REAR FLOOR NO. 1 BOARD

12. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

13. INSTALL REAR DOOR SCUFF PLATE RH

B132566
  1. Attach the 9 claws and 2 clips to install the scuff plate.

← INSTALLATION (Jan 2007 – Jul 2007)PRECAUTION (from Nov 2005) →