INSTALLATION
Removal / installation · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007
| 1. INSTALL ENGINE SWITCH |
Attach the 2 claws and install the switch.

Connect the switch connector.
| 2. INSTALL HEATER CONTROL ASSEMBLY |
Connect the connectors.

Attach the 3 clips to install the heater control assembly.
Install the 2 screws.
| 3. INSTALL RADIO RECEIVER (w/ Radio Receiver) |
![]() ![]() |
Connect the connectors.
Attach the 4 clips to install the radio receiver.
Install the 4 bolts.
| 4. INSTALL STEREO OPENING COVER (w/o Radio Receiver) |
![]() ![]() |
Attach the 4 clips to install the stereo opening cover.
Install the 4 bolts.
| 5. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER |
![]() ![]() |
Connect the connector.
Attach the 3 clips and 3 claws to install the cluster finish panel.
| 6. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER |
![]() ![]() |
Connect the connector.
Attach the 3 clips and 3 claws to install the cluster finish panel.
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |




