2005-2008 RAV4 · Service Manual BODY ELECTRICAL

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Nov 2005


CHECK DTC

  1. B127990E01
    Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) and turn the intelligent tester ON.

  3. Select the following menu items: Body / Combination Meter / DTC.

  4. Check for DTCs and then write them down.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

  5. Confirm the details of the DTCs (Click here).


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) (do not start the engine) and turn the intelligent tester ON.

  3. Select the following menu items: Body / Combination Meter / DTC / Clear.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

  4. Erase DTCs by pressing the YES button on the tester.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

← DIAGNOSIS SYSTEM (from Nov 2005)FAIL-SAFE CHART (from Nov 2005) →