C1511/11 Torque Sensor 1 Malfunction
Diagnostic trouble codes · Vehicles built from Nov 2005
Also covers:
- C1512/11 Torque Sensor 2 Malfunction
- C1513/11 Torque Sensor Deviation Excessive
- C1514/11 Torque Sensor Power Supply Voltage Malfunction
DESCRIPTION
The torque sensor converts the rotation torque input from the steering wheel into electric signals and sends them to the power steering ECU.| DTC No. |
DTC Detection Condition |
Trouble Area |
| C1511/11 |
Torque sensor malfunction |
|
| C1512/11 | ||
| C1513/11 | ||
| C1514/11 |
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK CONNECTOR CONNECTION CONDITION (TORQUE SENSOR - ECU) |
Check the installation condition of the torque sensor connector.
- OK:
- Torque sensor connector is securely connected to the power steering ECU.
Result Result
Proceed to
NG
A
OK
B
|
|
||||
| A | |
| 2. RECONFIRM DTC |
Securely connect the torque sensor connector.
Check for DTCs.
- OK:
- DTC is not output.
Result
Proceed to
DTC is output
A
DTC is not output
B
|
|
||||
| A | |
| 3. INSPECT TORQUE SENSOR |
Turn the ignition switch on (IG).
Measure the voltage of the ECU.

- Standard voltage:
Tester Connection
Condition
Specified Condition
h2-6 (TRQ1) - h2-1 (TRQG)
Steering wheel not turned (without load)
2.3 to 2.7 V
Steering wheel turned to right with vehicle stopped
2.5 to 4.04 V
Steering wheel turned to left with vehicle stopped
0.95 to 2.5 V
h2-2 (TRQ2) - h2-1 (TRQG)
Steering wheel not turned (without load)
2.3 to 2.7 V
Steering wheel turned to right with vehicle stopped
0.95 to 2.5 V
Steering wheel turned to left with vehicle stopped
2.5 to 4.04 V
h2-4 (TRQF) - h2-1 (TRQG)
Always
3.35 to 3.37 V
h2-3 (TRQV) - h2-1 (TRQG)
Always
8.5 to 10.5 V
|
|
||||
| OK | ||
| ||
