INSPECTION
Inspection · Vehicles built Nov 2005 – Jul 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
| CHECK DOWNHILL ASSIST CONTROL SWITCH |
Measure the resistance of the switch.

- Standard resistance:
Tester Connection
Switch Condition
Specified Condition
1 - 4
Released
10 kΩ or higher
1 - 4
Pushed in
Below 25 Ω
Check illumination operation.
Connect the battery's positive (+) lead to terminal 3 and negative (-) lead to terminal 2. Then check that the bulb illuminates.
- OK:
- Bulb illuminates.
