INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL TRANSMISSION OIL COOLER |
![]() ![]() |
Install the oil cooler to the bracket with the 3 bolts.
- Torque:
- 12 N*m{ 122 kgf*cm , 9 ft.*lbf }
*1: Connect the No. 1 oil cooler outlet hose to the transmission.

*2: Connect the No. 1 oil cooler inlet hose to the transmission.
*3: Connect the No. 3 water by-pass hose to the transmission.
*4: Connect the No. 4 water by-pass hose to the transmission.
| 2. ADD AUTOMATIC TRANSAXLE FLUID |
| 3. INSPECT AUTOMATIC TRANSAXLE FLUID |
Inspect the automatic transaxle fluid (Click here).
| 4. ADD COOLANT |
Add the coolant (Click here).

