REMOVAL
Removal / installation · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2.
REMOVE SHOULDER BELT ANCHOR COVER RH |
 |
Using a screwdriver, remove the 4 claws and cover.
- HINT:
- Tape the screwdriver tip before use.
| 3.
REMOVE ROOF HEADLINING ASSEMBLY (for Short Body) |
 |
- HINT:
- It is not necessary to completely remove the roof headlining. Slightly lower the rear section of the roof headlining.
Partially remove the roof headlining (Click here).
| 4.
REMOVE ROOF HEADLINING ASSEMBLY (for Long Body) |
 |
- HINT:
- It is not necessary to completely remove the roof headlining. Slightly lower the rear section of the roof headlining.
Partially remove the roof headlining (Click here).
| 5.
REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (for Short Body) |
 |
Remove the 2 bolts and seat belt.
| 6.
REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (for Long Body) |
 |
Remove the 2 bolts and seat belt.