2005-2008 RAV4 · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Nov 2005 – Dec 2006

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. INSTALL NAVIGATION RECEIVER ASSEMBLY

  1. B131479
    Install the No. 1 radio bracket to the radio receiver with the 4 screws.

  1. B131480
    Install the No. 2 radio bracket to the radio receiver with the 4 screws.

  1. Connect all connectors to install the radio receiver.

  1. Install the radio receiver to attach the 4 claws.

  1. Install the 4 screws.

    B131947


2. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER

B129892
  1. Using a screwdriver, detach the 3 clips, 3 claws and remove the cluster finish panel, then disconnect the connector.

    HINT:
    Tape the screwdriver tip before use.


3. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER

B140788
  1. Connect the connector.

  1. Attach the 3 clips and 3 claws to install the cluster finish panel.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← REMOVAL (from Jan 2007)INSTALLATION (Jan 2007 – Jul 2007) →