2005-2008 RAV4 · Service Manual SUSPENSION & AXLE

DISPOSAL

Removal / installation · Vehicles built from Nov 2005


1. DISPOSE OF SHOCK ABSORBER ASSEMBLY LH

  1. C127546E01
    Fully extend the shock absorber piston rod, and clamp it in a vise at an angle.

  1. Using a drill or similar tool, gradually make a hole in area A to discharge the gas inside of the absorber.

    CAUTION:
    As metal debris may be blown outward by the gas, you must

    1. Wear protective glasses.
    2. Cover the area being cut.

    NOTICE:
    The gas is colorless and harmless.

← INSTALLATION (from Aug 2007)COMPONENTS (from Nov 2005) →