INSTALLATION
Removal / installation · Vehicles built Jan 2007 – Jul 2007
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007
| 1.
INSTALL FRONT NO. 1 STABILIZER BAR BUSH LH |
 |
Install the bush.
- HINT:
- Install each bush to the inner side of each bush stopper on the stabilizer bar.
- Install each bush with it slit facing the vehicle rear side.
| 2.
INSTALL FRONT NO. 1 STABILIZER BAR BUSH RH |
 |
- HINT:
- Use the same procedures described for the LH side.
| 3.
INSTALL FRONT STABILIZER BAR |
 |
Install the stabilizer bar to the crossmember.
| 4.
INSTALL FRONT SUSPENSION MEMBER BRACE FRONT LH |
 |
Install the member brace with the 4 bolt to the suspension member.
-
Torque:
- 87 N*m{
887 kgf*cm
, 64 ft.*lbf
}
| 5.
INSTALL FRONT SUSPENSION MEMBER BRACE FRONT RH |
 |
- HINT:
- Use the same procedures described for the LH side.
| 6.
INSTALL FRONT STABILIZER LINK ASSEMBLY LH |
 |
Install the link with the 2 nuts.
-
Torque:
- 74 N*m{
755 kgf*cm
, 55 ft.*lbf
}
| 7.
INSTALL FRONT STABILIZER LINK ASSEMBLY RH |
 |
- HINT:
- Use the same procedures described for the LH side.
| 8.
INSTALL FRONT WHEEL |
 |
-
Torque:
- 103 N*m{
1050 kgf*cm
, 76 ft.*lbf
}
| 9.
STABILIZE SUSPENSION
|
 |
Lower the vehicle.
Press down on the vehicle several times to stabilize the suspension.