2005-2008 RAV4 · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Aug 2007

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. INSTALL REAR POWER OUTLET SOCKET ASSEMBLY

B133576
  1. Attach the 2 claw fittings to install the socket.


2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

  1. B129706
    Install the belt hanger to the trim board.

  1. Connect the power outlet socket connector.

  1. Attach the 4 clips and 5 claws to install the trim board.

  1. Install the 2 screws and 2 bolts.

  1. B137546
    Connect the rear No.1 seat belt's floor anchor.

    1. Connect the floor anchor with the bolt.

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    2. Install the anchor cover.


3. INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY

4. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH

5. INSTALL REAR FLOOR FINISH PLATE

  1. B129704
    Attach the 2 claws and 6 clips to install the finish plate.


6. INSTALL BACK DOOR WEATHERSTRIP

7. INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE

B129705
  1. Attach the 7 clips to install the side plate.

  1. Install the 4 screws.


8. INSTALL REAR FLOOR NO. 2 BOARD

9. INSTALL REAR FLOOR NO. 3 BOARD

10. INSTALL DECK BOARD ASSEMBLY

11. INSTALL REAR FLOOR NO. 1 BOARD

12. INSTALL TONNEAU COVER ASSEMBLY

13. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY

14. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

15. INSTALL REAR DOOR SCUFF PLATE LH

  1. B129703
    Attach the 9 claws and 2 clips to install the scuff plate.


16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← INSTALLATION (Jan 2007 – Jul 2007)PRECAUTION (from Nov 2005) →