INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT INTAKE MANIFOLD |
 |
- Using a precision straightedge and feeler gauge, measure the warpage of the contact surface the cylinder head.
- Maximum warpage:
- 0.10 mm (0.0039 in.)
If the warpage is greater than the maximum, replace the manifold.
| INSPECT EXHAUST MANIFOLD |
 |
- Using a precision straightedge and feeler gauge, measure the warpage of the contact surface the cylinder head.
- Maximum warpage:
- 0.40 mm (0.0157 in.)
If the warpage is greater than the maximum, replace the manifold.