REMOVAL
Removal / installation · Vehicles built from Nov 2005
- HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- Use the same procedures for the RH side and LH side.
| 1. REMOVE FRONT WHEEL |
| 2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH |
Remove the 2 nuts and stabilizer link.

| 3. REMOVE FRONT SUSPENSION LOWER NO. 1 ARM SUB-ASSEMBLY LH |
![]() ![]() |
Remove the 2 nuts and bolt, and disconnect the lower arm from the ball joint.
Remove the bolt and nut from the suspension member (front side).

Remove the bolt and nut from the suspension member (rear side).


