INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1.
INSTALL BACK DOOR COURTESY LIGHT ASSEMBLY |
 |
- Install the bulb to the light.
- Attach the 4 claws to install the light shade.
- Install the light as shown in the illustration.
| 2.
INSTALL BACK DOOR TRIM BOARD
|
 |
Install the back door trim pocket with the 5 screws.
- Attach the 13 clips to install the trim board.
| 3.
INSTALL BACK DOOR SIDE GARNISH RH
|
 |
- HINT:
- Use the same procedures described for the LH side.
| 4.
INSTALL BACK DOOR SIDE GARNISH LH
|
 |
- Attach the 2 claws and 2 clips to install the garnish.
| 5.
INSTALL BACK DOOR CENTER GARNISH
|
 |
- Attach the 4 claws and 4 clips to install the garnish.
| 6.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|