2005-2008 RAV4 · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. CONNECT NO. 1 OIL COOLER OUTLET HOSE

C133018E01
  1. Connect the hose to the transaxle and transmission oil filler tube.


2. INSTALL OIL COOLER TUBE SUB-ASSEMBLY

C133020
  1. Install the tube with the bolt.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }

    NOTICE:
    Make sure the rotation stopper of the tube contacts the top part of the engine mount bracket FR.


3. CONNECT NO. 1 OIL COOLER INLET HOSE

C133019E01
  1. Connect the hose to the transaxle and oil cooler tube.


4. CONNECT NO. 1 AND NO. 2 TRANSMISSION OIL COOLER HOSES

C133021E01
  1. Connect the 2 hoses to the transmission oil filler tube and oil cooler tube.

  1. Install the 2 automatic transmission oil cooler tube clamps to the radiator.

    C130927E01

  1. Install the 2 No. 1 flexible hose clamps to the radiator with the 2 bolts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Connect the 2 hoses to the radiator.

  1. Pass the 2 hoses through the 2 automatic transmission oil cooler tube clamps.

  1. Connect the 2 hoses to the 2 No. 1 flexible hose clamps, and close the 2 clamps.


5. ADD AUTOMATIC TRANSAXLE FLUID

6. INSPECT AUTOMATIC TRANSAXLE FLUID
  1. Inspect the automatic transaxle fluid (Click here).

← REMOVAL (from Nov 2005)REPLACEMENT (Nov 2005 – Dec 2006) →