2005-2008 RAV4 · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Aug 2007


1. CONNECT OIL COOLER INLET HOSE

C133998E01
  1. Connect the hose to the transaxle and transmission oil filler tube.


2. INSTALL OIL COOLER TUBE SUB-ASSEMBLY

C136357
  1. Install the tube with the bolt.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }

    NOTICE:
    Make sure that the tube rotation stopper contacts the top part of the front engine mounting bracket.


3. CONNECT OIL COOLER OUTLET HOSE

C133999E01
  1. Connect the hose to the transaxle and oil cooler tube.


4. CONNECT NO. 1 AND NO. 2 TRANSMISSION OIL COOLER HOSES

C179017E01
  1. Connect the 2 hoses to the transmission oil filler tube and oil cooler tube.

  1. Install the 2 automatic transmission oil cooler tube clamps to the radiator.

    C130927E01

  1. Install the 2 No. 1 flexible hose clamps to the radiator with the 2 bolts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Connect the 2 hoses to the radiator.

  1. Pass the 2 hoses through the 2 automatic transmission oil cooler tube clamps.

  1. Connect the 2 hoses to the 2 No. 1 flexible hose clamps, and close the 2 clamps.


5. ADD AUTOMATIC TRANSAXLE FLUID

6. INSPECT AUTOMATIC TRANSAXLE FLUID
  1. Inspect the automatic transaxle fluid (Click here).

← REMOVAL (from Aug 2007)COMPONENTS (from Aug 2007) →