SERVICE DATA
Specifications · Vehicles built from Nov 2005
| Charging circuit without load |
Standard amperage: 10 A or less Standard voltage: 12.1 to 15.4 V |
|
| Charging circuit with load |
Standard amperage: 30 A or more |
|
| Brush length |
Standard: 10.5 mm (0.413 in.) Minimum: 4.5 mm (0.177 in.) |
|
| Generator rotor assembly |
Coil resistance: 2.3 to 2.7 kΩ at 20°C (68°F) Standard slip ring diameter: 14.2 to 14.4 mm (0.559 to 0.567 in.) Minimum slip ring diameter: 14.0 mm (0.551 in.) |
|
| Battery current sensor |
2 (VC5) - 4 (E2) |
3 to 10 kΩ |
| 2 (VC5) - 3 (IB) |
Below 0.5 kΩ |
|
| 3 (IB) - 4 (E2) |
3 to 10 kΩ |
|
| 1 (THB) - 4 (E2) |
1.5 to 2.5 kΩ |
|