SERVICE DATA
Specifications · Vehicles built from Nov 2005
| No.1 fan motor |
Standard current 10.6 to 16.6 A at 20°C (68°F) |
|
| No.2 fan motor |
Standard current 7.8 to 11.8 A at 20°C (68°F) |
|
| Thermostat |
Valve opening temperature 80 to 84°C (176 to 183°F) Valve lift 10.0 mm (0.394 in.) or more at 90°C (203°F) |
|
| No.1 fan relay |
3 - 5 |
Standard resistance: 10 kΩ or higher |
| 3 - 5 |
Standard resistance: Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
|
| No.2 fan relay |
3 - 4 |
Standard resistance: Below 1 Ω |
| 3 - 5 |
Standard resistance: 10 kΩ or higher |
|
| 3 - 4 |
Standard resistance: 10 kΩ or higher (when battery voltage is applied to terminals 1 and 2) |
|
| 3 - 5 |
Standard resistance: Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
|
| No.3 fan relay |
3 - 5 |
Standard resistance: 10 kΩ or higher |
| 3 - 5 |
Standard resistance: Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
|
| Radiator reservoir cap |
Standard opening pressure: 93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2, 13.5 to 17.8 psi) Minimum opening pressure: 78.5 kPa (0.8 kgf/ cm2, 11.4 psi) (after using cap) |
|