SERVICE DATA
Specifications · Vehicles built from Nov 2005
| Pedal height from dash panel |
for LHD |
169.2 - 172.9 mm (6.661 - 6.807 in.) for 1AZ-FE 173.9 - 183.9 mm (6.846 - 7.240 in.) for 2AZ-FE 176.5 - 186.5 mm (6.949 - 7.343 in.) for 2AD-FTV, 2AD-FHV |
| for RHD |
195.5 - 205.5 mm (7.697 - 8.091 in.) for 1AZ-FE 207.4 - 217.4 mm (8.165 - 8.559 in.) for 2AZ-FE 211.1 - 221.1 mm (8.311 - 8.705 in.) for 2AD-FTV, 2AD-FHV |
|
| Clutch pedal free play |
5.0 - 15.0 mm (0.197 - 0591 in.) |
|
| Clutch pedal push rod play at pedal top |
1.0 - 5.0 mm (0.039 - 0.197 in.) |
|
| Clutch release point from pedal full stroke end position |
25 mm (0.98 in.) or more |
|
| Clutch disc rivet head depth |
Maximum |
0.3 mm (0.012 in.) |
| Clutch disc assembly runout |
Minimum |
0.8 mm (0.031 in.) |
| Diaphragm spring finger wear |
Maximum depth |
0.5 mm (0.020 in.) |
| Maximum width |
6.0 mm (0.236 in.) |
|
| Flywheel sub-assembly runout |
Maximum |
0.1 mm (0.004 in.) |
| Diaphragm spring tip non-alignment |
Maximum depth |
0.5 mm (0.020 in.) |