SERVICE DATA
Specifications · Vehicles built from Aug 2007
| Starter assembly |
Standard current |
90 A or less at 11.5 V |
|
| Starter relay |
Standard resistance |
3 - 5 |
10 kΩ or higher |
| 3 - 5 |
Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
||
| Ignition switch |
Standard resistance |
- |
10 kΩ or higher at LOCK |
| 2 (AM1) - 3 (ACC) |
Below 1 Ω at ACC |
||
| 2 (AM1) - 3 (ACC) |
Below 1 Ω at ON |
||
| 2 (AM1) - 4 (IG1) |
Below 1 Ω at ON |
||
| 6 (IG2) - 7 (AM2) |
Below 1 Ω at ON |
||
| 1 (ST1) - 2 (AM1) |
Below 1 Ω at START |
||
| 1 (ST1) - 4 (IG1) |
Below 1 Ω at START |
||
| 6 (IG2) - 7 (AM2) |
Below 1 Ω at START |
||
| 6 (IG2) - 8 (ST2) |
Below 1 Ω at START |
||
| Starter magnetic switch assembly |
Standard resistance |
50 - C |
1 Ω or lower |
| 50 - Body |
2 Ω or lower |
||
| Starter armature assembly |
Standard resistance |
Segment |
1 Ω or lower |
| Commutar - Coil core |
10 kΩ or higher |
||
| Starter armature assembly |
Commutator depth |
Standard |
3.1 mm (0.122 in.) |
| Maximum |
3.8 mm (0.150 in.) |
||
| Starter commutator end frame |
Brush length |
Standard length |
9.0 mm (0.354 in.) |
| Minimum length |
4.0 mm (0.158 in.) |
||
| Standard resistance |
Positive (+) - Negative (-) |
10 kΩ or higher |
|
| Snap ring |
Maximum length |
5.0 mm (0.197 in.) |
|