RECOVERY
Removal / installation · Vehicles built from Jan 2007
| 1.
RECOVER TIRE REPAIR SEALANT |
 |
- NOTICE:
- The usable period of tire repair sealant is 4 years. After that period expires, the quality of the tire repair sealant will not be warranted.
- While performing the following operations, be careful not to spill any of the tire repair sealant that is in a tire.
- Use a shop rag or piece of cloth to wipe off tire repair sealant.
- Do not reuse the shop rag or piece of cloth that was used to wipe off tire repair sealant. Be sure to dispose of it properly.
- Do not reuse work gloves and clothes that are contaminated with tire repair sealant. Be sure to dispose of them properly.
- Do not reuse a flat tire that cannot be repaired.
- Do not reuse a flat tire if its punctured area cannot be determined.
- Do not reuse the valve and valve core.
- HINT:
- A wheel can be reused after tire repair sealant has been wiped off.
- A tire can be reused if its punctured area has been repaired.
- Using a tire changer, remove the tire from the wheel.
- NOTICE:
- Do not lift the tire quickly. Doing so may cause the tire repair sealant that is in the tire to spill.
- HINT:
- Remove the tire by following the same procedure as the replacement of the tire.
Recover the tire repair seal from the removed tire.
- Connect injection and extension hoses and install them to an empty tire repair sealant bottle.
- HINT:
- If there is no empty sealant bottle, use a substitute plastic bottle to scoop up the tire repair sealant.
- Squeeze the bottle by hand to remove air from the bottle.
- Keeping the bottle squeezed, put the end of the extension hose into the tire repair sealant inside the tire.
- Release the bottle to allow the tire repair sealant to enter the bottle.
- Using a shop rag or piece of cloth, wipe off the tire repair sealant adhered to the inside of the tire, wheel, floor, and the tire changer.