REMOVAL
Removal / installation · Vehicles built from Aug 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
| 1. REMOVE RADIATOR SUPPORT OPENING COVER |
![]() ![]() |
Remove the 9 clips and radiator support opening cover.
| 2. REMOVE CENTER HOOD CUSHION |
Using a clip remover, remove the center hood cushion.

| 3. REMOVE RADIATOR GRILLE PROTECTOR |
![]() ![]() |
Remove the 2 radiator grille protectors.
| 4. REMOVE FRONT FENDER FRONT SPLASH SHIELD LH (w/ Diffuser) |
![]() ![]() |
Remove the screw, bolt, nut and splash shield.
| 5. REMOVE FRONT FENDER FRONT SPLASH SHIELD RH (w/ Diffuser) |
- HINT:
- Use the procedure described for the LH side.
| 6. REMOVE FRONT BUMPER COVER |
![]() ![]() |
Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.
- HINT:
- Tape the screwdriver tip before use.
- Use the same procedure for the RH and LH sides.
- Tape the screwdriver tip before use.
Remove the retainer.
- HINT:
- Use the same procedure for the RH and LH sides.
Put protective tape around the bumper cover.

Using a clip remover, remove the 4 clips.
Remove the 8 screws.
Detach the 4 claws and remove the bumper cover.

w/ Fog Light:
Disconnect the 2 fog light connectors.
| 7. REMOVE HIGH PITCHED HORN ASSEMBLY |
![]() ![]() |
Disconnect the horn connector.
Remove the bolt and horn.





