2005-2008 RAV4 · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Aug 2008

Versions by build date: Nov 2005 – Jul 2007 Aug 2007 – Jul 2008 from Aug 2008


1. INSTALL LOWER NO. 2 RADIATOR GRILLE

B208463
  1. Attach the 12 claws and 3 guides to install the lower No. 2 radiator grille.


2. INSTALL LOWER NO. 1 RADIATOR GRILLE

B208462
  1. Attach the 16 claws to install the lower No. 1 radiator grille.


3. INSTALL RADIATOR GRILLE SUB-ASSEMBLY

B208460
  1. Attach the 7 claws and guide to install the radiator grille.

  1. B208461
    Install the 3 bolts and 3 nuts.


4. INSTALL HOOD TO RADIATOR GRILLE SEAL
  1. Clean the bumper cover surface.

    1. Using a heat light, heat the bumper cover surface.

      Standard:
      Item
      Specified Condition
      Bumper cover
      20 to 30°C (68 to 86°F)

      NOTICE:
      Do not heat the bumper cover excessively.

    2. Remove the double-sided tape from the bumper cover.

    3. Wipe off any tape adhesive residue with cleaner.

  1. B208348E01
    Install a new hood to radiator grille seal.

    1. Using a heat light, heat the bumper cover and hood to radiator grille seal.

      Standard:
      Item
      Specified Condition
      Bumper cover
      20 to 30°C (68 to 86°F)
      Hood to radiator grille seal
      20 to 30°C (68 to 86°F)

      NOTICE:
      Do not heat the bumper cover and hood to radiator grille seal excessively.

    2. Attach the 9 clips to install the hood to radiator grille seal.

    3. Install the 4 clips.

    4. Remove the peeling paper from the face of the hood to radiator grille seal.

    5. Attach the double-sided tape on the hood to radiator grille seal to the bumper cover.

      HINT:
      Press the hood to radiator grille seal firmly to install it.


5. INSTALL FRONT BUMPER COVER

B208306
  1. w/ Fog Light:
    Connect the 2 fog light connectors.

  1. Attach the 4 claws to install the bumper cover.

  1. B209171
    Install the 8 screws and 4 clips.

  1. B209204
    Install the retainer.

    HINT:
    Use the same procedure for the RH and LH sides.

  1. Position the groove on the pin hold clip vertically and insert the clip to install it.

    NOTICE:
    Make sure that the groove on the pin hold clip is positioned vertically.

    HINT:
    Use the same procedure for the RH and LH sides.


6. INSTALL FRONT FENDER FRONT SPLASH SHIELD LH

B208332
  1. Install the splash shield with the nut, bolt and screw.


7. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH

HINT:
Use the procedure described for the LH side.


8. INSTALL RADIATOR GRILLE PROTECTOR

B209174
  1. Install the 2 radiator grille protectors.


9. INSTALL CENTER HOOD CUSHION

B209173
  1. Install the hood cushion.


10. INSTALL RADIATOR SUPPORT OPENING COVER

B209240
  1. Install the radiator support opening cover with the 9 clips.

← INSTALLATION (Aug 2007 – Jul 2008)COMPONENTS (from Nov 2005) →