Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for DVD)

NAVIGATION SYSTEM (for DVD) > Display does not Dim when Light Control Switch is Turned ON

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK IMAGE QUALITY SETTING


    E182329E01
  1. Enter the display adjustment screen by pressing the "DISPLAY" switch.

  1. Turn the light control switch to the TAIL position.

  1. Check if "Day Mode" on the display adjustment is on.

    OK:
    "Day Mode" is on.



NG
Go to step 2
OK

TURN "DAY MODE" SETTING OFF 

2.CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE)


    E120054E13
  1. Enter the "Display Check" mode and select "Vehicle Signal Check" (Click here).

  1. Check that the display changes between ON and OFF according to the light control switch operation.

    OK:
    Light Control Switch Condition
    Display Condition
    TAIL or HEAD
    ON
    OFF
    OFF

    HINT:
    The display is updated once per second. It is normal for the display to lag behind the actual switch operation.



NG
GO TO "Illumination Circuit" (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)