Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for HDD)

NAVIGATION SYSTEM (for HDD) > Cursor or Map Rotates when Vehicle Stopped

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CONDITION


    E106418
  1. Check with the customer if the vehicle has been turned by a turntable.

    OK:
    Vehicle has not been turned by turntable.

    HINT:
    If the vehicle is turned on a turntable with the ignition switch ON, the system may store the angular velocity. As a result, the vehicle position cursor may deviate.



NG
TURN IGNITION SWITCH TO ON WHEN VEHICLE IS COMPLETELY STOPPED
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)