DRIVE BELT > INSTALLATION |
| 1. INSTALL FAN AND GENERATOR V BELT |
Using SST and a 22 mm wrench, rotate the tensioner pulley counterclockwise, and then install the fan and generator V belt.

| 2. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH |
![]() |
Install the front suspension member reinforcement with the 4 bolts.
| 3. INSTALL REAR ENGINE UNDER COVER RH |
Install the under cover with the 2 clips.
| 4. INSTALL NO. 1 ENGINE UNDER COVER |
![]() |
Attach the 4 clips to install the engine cover.