DRIVE BELT > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
![]() |
Detach the 4 clips and remove the engine cover.
| 2. REMOVE REAR ENGINE UNDER COVER RH |
Remove the 2 clips and under cover.
| 3. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH |
![]() |
Remove the 4 bolts and front suspension member reinforcement.
| 4. REMOVE FAN AND GENERATOR V BELT |
Using SST and a 22 mm wrench, rotate the tensioner pulley counterclockwise to loosen the belt tension. Then remove the belt.
