THERMOSTAT > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
Remove the 6 bolts, 10 clips and engine under cover.
| 2. DRAIN ENGINE COOLANT |
Loosen the radiator drain cock plug.
Remove the radiator reservoir cap.
Loosen the cylinder block drain cock plug.

| *1 | Radiator Reservoir Cap | *2 | Radiator Reservoir |
| *3 | Cylinder Block Drain Cock | *4 | Radiator Drain Cock Plug |
| 3. REMOVE RADIATOR SUPPORT OPENING COVER |
![]() |
Remove the 9 clips and radiator support opening cover.
| 4. REMOVE NO. 2 WATER BY-PASS HOSE |
![]() |
Remove the No. 2 water by-pass hose from the radiator reservoir.
| 5. DISCONNECT OUTLET RADIATOR HOSE |
![]() |
Disconnect the radiator hose from the water inlet.
| 6. REMOVE NO. 4 INLET WATER BY-PASS PIPE |
![]() |
Remove the bolt and No. 4 inlet water by-pass pipe.
| 7. REMOVE WATER INLET |
![]() |
Remove the 3 bolts and water inlet.
| 8. REMOVE THERMOSTAT |
![]() |
Remove the thermostat.
Remove the gasket from the thermostat.