LUMBAR SUPPORT ADJUSTER ASSEMBLY > INSPECTION |
| 1. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY (for LHD) |
![]() |
Check operation of the lumbar support adjuster.
Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.
| Measurement Condition | Operation Direction |
| Battery positive (+) → 1 (H) Battery negative (-) → 2 (R) | Clockwise |
| Battery positive (+) → 2 (R) Battery negative (-) → 1 (H) | Counterclockwise |
| 2. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (for RHD) |
![]() |
Check operation of the lumbar support adjuster.
Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.
| Measurement Condition | Operation Direction |
| Battery positive (+) → 1 (R) Battery negative (-) → 2 (H) | Clockwise |
| Battery positive (+) → 2 (H) Battery negative (-) → 1 (R) | Counterclockwise |