Home › ENGINE ยท 2AD-FTV › STARTING › IGNITION SWITCH (w/o Entry and Start System)

IGNITION SWITCH (w/o Entry and Start System) > INSTALLATION

for Preparation Click here



1. INSTALL IGNITION SWITCH ASSEMBLY


    A210296
  1. Install the ignition switch with the 2 screws.



    A210298
  1. Connect the ignition switch connector.

  1. Attach the clamp to connect the wire harness.



2. INSTALL LOWER STEERING COLUMN COVER


    A194728
  1. Attach the 4 claws to install the lower steering column cover.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL