Home › TRANSMISSION ยท CLUTCH › CLUTCH PEDAL (for RHD)

CLUTCH PEDAL (for RHD) > REASSEMBLY

for Preparation Click here



1. INSTALL PEDAL SPRING HOOK


C128476E01
  1. Apply MP grease to the contact surface of the hook.

  1. Install the hook.



2. INSTALL CLUTCH PEDAL CUSHION


C128849
  1. Install the cushion to the clutch pedal.



3. INSTALL COLLAR


C128475E01
  1. Apply MP grease to both sides of a new collar and 2 new bushes.

  1. Install the collar.

  1. Install the 2 bushes.



4. INSTALL CLUTCH PEDAL SUB-ASSEMBLY


C128473
  1. Install the clutch pedal to the clutch pedal support with the bolt and nut.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

    HINT:
    Install the bolt from the left side of the vehicle.



    C128472E01
  1. Install the clutch pedal return spring.



5. INSTALL CLUTCH PEDAL SPRING HOLDER


C128474E01
  1. Apply MP grease to the contact surface of the clutch pedal spring holder.

  1. Install the clutch pedal spring holder.



6. INSTALL CLUTCH PEDAL SPRING


C128471E01
  1. Apply MP grease to the contact surface of the clutch pedal.

  1. Install the spring.



7. INSTALL CLUTCH START SWITCH ASSEMBLY (w/ Entry and Start System)
  1. Install the clutch start switch with the nut.

    Torque:
    16 N*m{ 160 kgf*cm , 12 ft.*lbf }

  1. Connect the clutch start switch connector.



8. INSTALL CLUTCH SWITCH ASSEMBLY (w/ Cruise Control System)
  1. Install the clutch switch with the nut.

    Torque:
    16 N*m{ 160 kgf*cm , 12 ft.*lbf }

  1. Connect the clutch switch connector.