Home › BODY ELECTRICAL › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL CENTER STOP LIGHT ASSEMBLY


B131434
  1. Install the center stop light with the 2 screws.

  1. Connect the connector.



2. INSTALL REAR SPOILER
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

  1. If reusing the spoiler:
    Clean the spoiler.

    1. Using a heat light, heat the spoiler.

  1. Connect the center stop light connector.



    B127944
  1. Install the spoiler with 3 clips.



    B127943
  1. Install the 3 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }



3. INSTALL BACK DOOR CENTER GARNISH


    B129944
  1. Attach the 4 claws and 4 clips to install the garnish.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL