WASHER MOTOR > INSTALLATION |
| 1. INSTALL REAR WASHER MOTOR AND PUMP ASSEMBLY |
![]() |
Install the washer motor and pump to the packing of the washer jar.
| 2. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
![]() |
Install the windshield washer motor and pump to the packing of the washer jar.
| 3. INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY (w/ Headlight Cleaner System) |
![]() |
Install the headlight cleaner motor and pump to the packing of the washer jar.
| 4. INSTALL WINDSHIELD WASHER JAR ASSEMBLY (w/o Headlight Cleaner System) |
Install the windshield washer jar with the 3 screws.

Connect the 2 connectors.
Connect the 2 washer hoses to the washer motor and pumps.
![]() |
for Large:
Attach the 3 clamps.
for Small:
Attach the 2 clamps.
| 5. INSTALL WINDSHIELD WASHER JAR ASSEMBLY (w/ Headlight Cleaner System) |
![]() |
Install the windshield washer jar with the 3 screws.
Connect the 4 connectors.
Connect the 3 washer hoses to the washer motor and pumps.
![]() |
Attach the 4 clamps.
| 6. FILL UP WASHER JAR ASSEMBLY WITH WASHER FLUID |
Fill the washer jar with washer fluid.
| 7. INSTALL WASHER INLET SUB-ASSEMBLY |
![]() |
Install the washer inlet to the windshield washer jar.
![]() |
Install the clip to the washer inlet of the washer jar.
| 8. INSTALL FRONT BUMPER COVER |
w/o Under Guard:
Install the front bumper cover .
w/ Under Guard:
Install the front bumper cover .
| 9. INSTALL FRONT FENDER LINER LH |
![]() |
Install the fender liner with the clip and fender liner retainer.
Install the screw, nut and bolt.
| 10. INSTALL FRONT FENDER LINER RH |
| 11. INSTALL FRONT FENDER FRONT SPLASH SHIELD LH |
![]() |
Install the splash shield with the nut, bolt and screw.
| 12. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH |
| 13. INSTALL RADIATOR GRILLE PROTECTOR |
![]() |
Install the 2 radiator grille protectors.
| 14. INSTALL CENTER HOOD CUSHION |
![]() |
Install the hood cushion.
| 15. INSTALL RADIATOR SUPPORT OPENING COVER |
![]() |
Install the radiator support opening cover with the 9 clips.
| 16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |