Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER

RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 RADIO BRACKET (except 2AD-FTV, 2AD-FHV)


    B219620
  1. w/ Stereo Opening Cover:
    Install the No. 1 radio bracket and radio receiver panel LH to the radio receiver with the 4 bolts.



    B133627
  1. w/o Stereo Opening Cover:
    Install the No. 1 radio bracket to the radio receiver with the 4 bolts.



2. INSTALL NO. 2 RADIO BRACKET (except 2AD-FTV, 2AD-FHV)


    B219618
  1. w/ Stereo Opening Cover:
    Install the No. 2 radio bracket and radio receiver panel RH to the radio receiver with the 4 bolts.



    B133628
  1. w/o Stereo Opening Cover:
    Install the No. 2 radio bracket to the radio receiver with the 4 bolts.



3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


  1. w/ Stereo Opening Cover:
    Attach the 4 claws to install the instrument cluster finish panel.


    B219735



  1. w/o Stereo Opening Cover:
    Attach the 4 claws to install the instrument cluster finish panel.


    B219736



4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (except 2AD-FTV, 2AD-FHV)


  1. w/o Stereo Opening Cover:

    1. Connect all the connectors and install the radio receiver.

    2. Insert the radio receiver to attach the 2 claws and 4 clips on its backside.



    3. Install the 4 bolts.

      Torque:
      12.8 N*m{ 130 kgf*cm , 9 ft.*lbf }



      B219615



  1. w/ Stereo Opening Cover:

    1. Connect all the connectors and install the radio receiver.

    2. Insert the radio receiver to attach the 2 claws and 4 clips on its backside.



    3. Install the 4 bolts.

      Torque:
      12.8 N*m{ 130 kgf*cm , 9 ft.*lbf }



      B219616



5. INSTALL NO. 1 RADIO BRACKET (for 2AD-FTV, 2AD-FHV)


    B131479
  1. Install the No. 1 radio bracket to the radio receiver with the 4 bolts.



6. INSTALL NO. 2 RADIO BRACKET (for 2AD-FTV, 2AD-FHV)


    B131480
  1. Install the No. 2 radio bracket to the radio receiver with the 4 bolts.



7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for 2AD-FTV, 2AD-FHV)
  1. Connect all the connectors and install the radio receiver.

  1. Insert the radio receiver to attach the 2 claws and 4 clips on its backside.



  1. Install the 4 bolts.

    Torque:
    12.8 N*m{ 130 kgf*cm , 9 ft.*lbf }



    B219762



8. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER


B210523
  1. Connect the connector.

  1. Attach the 3 clips and 2 claws to install the cluster finish panel.



9. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER


B210524
  1. Connect the connector.

  1. Attach the 3 clips and 2 claws to install the cluster finish panel.



10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL