Home › TRANSMISSION · U660F AUTOMATIC TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM

AUTOMATIC TRANSAXLE SYSTEM > TERMINALS OF ECU

for Preparation Click here



TCM

C205631E02

HINT:
The standard voltage at each TCM terminal is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to inspect. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the TCM terminals.


Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
B128-15 (R) - B128-8 (E1)
R - BR
R position switch signal
Ignition switch ON and shift lever in R
11 to 14 V
Ignition switch ON and shift lever in any position except R
Below 1 V
B128-16 (D) - B128-8 (E1)
B - BR
D position switch signal
Ignition switch ON and shift lever in D or M
11 to 14 V
Ignition switch ON and shift lever in any position except D or M
Below 1 V
B128-12 (STP) - B128-8 (E1)
L - BR
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
Brake pedal is released
Below 1.5 V
B128-11 (NSW) - B128-8 (E1)
W - BR
Park/neutral position switch signal
Ignition switch ON and shift lever in P or N
Below 2 V
Ignition switch ON and shift lever in any position except P or N
11 to 14 V
B128-10 (STA) - B128-8 (E1)
LG - BR
Starter signal
Cranking (shift lever in P or N)
6 V or higher
Ignition switch ON and shift lever in P or N
Below 2 V
B128-3 (SPD) - B128-8 (E1)
V - BR
Speed signal from combination meter
Vehicle speed 20 km/h (12 mph)
Pulse generation
(See waveform 1)
B128-1 (BATT) - B128-8 (E1)
W - BR
Battery (for measuring battery voltage and for TCM memory)
Always
11 to 14 V
B128-13 (IGSW) - B128-8 (E1)
B - BR
Ignition switch
Ignition switch ON
11 to 14 V
B128-18 (+B) - B128-8 (E1)
B - BR
Power source of TCM
Ignition switch ON
11 to 14 V
B128-6 (CAN+) - B128-8 (E1)
Y - BR
CAN communication line
Ignition switch ON
Pulse generation
(See waveform 2)
B128-7 (CAN-) - B128-8 (E1)
W - BR
CAN communication line
Ignition switch ON
Pulse generation
(See waveform 3)


    C206833E01
  1. Using an oscilloscope, check waveform 1.
    Waveform 1 (reference) 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    B128-3 (SPD) - B128-8 (E1)
    2 V/DIV., 20 msec./DIV.
    Vehicle speed 20 km/h (12 mph)



  2. C201361E02
  3. Using an oscilloscope, check waveform 2.
    Waveform 2 (reference) 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    B128-6 (CAN+) - B128-8 (E1)
    1 V/DIV., 10 μsec./DIV.
    Ignition switch ON



  4. C201362E02
  5. Using an oscilloscope, check waveform 3.
    Waveform 3 (reference) 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    B128-7 (CAN-) - B128-8 (E1)
    1 V/DIV., 10 μsec./DIV.
    Ignition switch ON


ECM

C176147E13

HINT:
The standard voltage at each ECM terminal is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to inspect. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration below as a reference for the ECM terminals.


Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
A12-9 (S) - B32-109 (E1)
L - BR
M position switch signal
Ignition switch ON and shift lever in M
11 to 14 V
Ignition switch ON and shift lever not in M
Below 1 V
B32-61 (SFTU) - B32-109 (E1)
LG - BR
Up-shift position switch signal
Ignition switch ON and shift lever in M
11 to 14 V
  1. Ignition switch ON and shift lever in "+" (up-shift)
  2. Ignition switch ON and "+" shift paddle operated (up-shift)
Below 1 V
A12-28 (SFTD) - B32-109 (E1)
Y - BR
Down-shift position switch signal
Ignition switch ON and shift lever in M
11 to 14 V
  1. Ignition switch ON and shift lever in "-" (down-shift)
  2. Ignition switch ON and "-" shift paddle operated (down-shift)
Below 1 V
A12-36 (PWMS) - B32-109 (E1)
GR - BR
Pattern select switch (SPORT) signal
Ignition switch ON and pattern select switch (SPORT) off
11 to 14 V
Ignition switch ON and pattern select switch (SPORT) on
Below 1.5 V