HEADLIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL HEADLIGHT ASSEMBLY LH |
![]() |
Connect the connectors with the headlight.
Install the 3 screws and bolt.
| 2. INSTALL FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY |
Install the reinforcement and install the 2 bolts.
Connect the 2 horns connectors.
| 3. INSTALL FRONT BUMPER COVER |
![]() |
Connect the 2 fog light connectors.
Attach the 4 claws to install the bumper cover.
![]() |
Install the 8 screws and 4 clips.
![]() |
Install the retainer.
Position the groove on the pin hold clip vertically and insert the clip to install it.
| 4. INSTALL FRONT FENDER FRONT SPLASH SHIELD LH (w/ Diffuser) |
![]() |
Install the splash shield with the nut, bolt and screw.
| 5. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH (w/ Diffuser) |
| 6. INSTALL RADIATOR GRILLE PROTECTOR |
![]() |
Install the 2 radiator grille protectors.
| 7. INSTALL HOOD CENTER CUSHION |
![]() |
Install the hood cushion.
| 8. INSTALL RADIATOR SUPPORT OPENING COVER |
![]() |
Install the radiator support opening cover with the 9 clips.
| 9. ADJUST HEADLIGHT AIMING |
Adjust the headlight aiming (Click here ).