CIGARETTE LIGHTER > INSTALLATION |
| 1. INSTALL CIGARETTE LIGHTER ASSEMBLY |
![]() |
Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the bezel stay.
| 2. INSTALL CIGARETTE LIGHTER COVER |
Attach the 2 claws to install the cigarette lighter cover.
Connect the connector.

| 3. INSTALL SWITCH BASE |
![]() |
Connect the connectors.
Attach the 2 clips and 2 claws to install the switch base.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |