Home › ENGINE ยท 2AD-FTV › FUEL › FUEL FILTER

FUEL FILTER > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER


    A203808
  1. Detach the 4 clips and remove the engine cover.

    NOTICE:
    Attempting to disengage both front and rear clips at the same time may cause the cover to break.



2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    A208830
  1. Detach the clamp and disconnect the mass air flow meter connector.

  1. Disconnect the PCV hose.

  1. Disconnect the air cleaner hose.

  1. Detach the 3 clips and remove the air cleaner cap.



3. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY


4. REMOVE AIR CLEANER CASE


    A208831
  1. Detach the clamp.

  1. Remove the 3 bolts and air cleaner case.



5. REMOVE FUEL FILTER ASSEMBLY


  1. Disconnect the level warning switch connector.


    A125342

  1. Disconnect the 4 hoses indicated in the illustration.

  1. Remove the bolt and fuel filter.



6. DRAIN FUEL


    A131639
  1. Loosen the drain plug and drain the fuel from the fuel filter.



7. REMOVE LEVEL WARNING SWITCH


    A131640
  1. Clamp the fuel filter in a vise between aluminum plates.

    NOTICE:
    Be careful not to damage the fuel filter cap.

  1. Using pliers, remove the level warning switch.

    NOTICE:
    Be careful not to damage the level warning switch.

  1. Remove the O-ring from the level warning switch.



8. REMOVE FUEL FILTER ELEMENT ASSEMBLY


    A131641E02
  1. Using SST, remove the fuel filter element.

    SST
    09228-64030