OUTER REAR VIEW MIRROR > INSPECTION |
| 1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH |
![]() |
Apply battery voltage and check the operation of the mirror.
| Measurement Condition | Specified Condition |
| Battery positive (+) →Terminal 6 (MV) Battery negative (-) → Terminal 5 (M+) | Turns upward (A) |
| Battery positive (+) → Terminal 5 (M+) Battery negative (-) → Terminal 6 (MV) | Turns downward (B) |
| Battery positive (+) → Terminal 4 (MH) Battery negative (-) → Terminal 5 (M+) | Turns left (C) |
| Battery positive (+) → Terminal 5 (M+) Battery negative (-) → Terminal 4 (MH) | Turns right (D) |
![]() |
w/ Mirror Heater:
Measure the resistance according to the value (s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 2 (+) - 8 (-) | 65°C (149°F) | 4 to 12 Ω |
Apply battery voltage and check the operation of the mirror heater.
| Measurement Condition | Specified Condition |
| Battery positive (+) → Terminal 2 (+) Battery negative (-) → Terminal 8 (-) | Mirror becomes warm |
![]() |
w/ Retract Mirror:
For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror's movement.
| Measurement Condition | Mirror Position | Specified Condition |
| Battery positive (+) - Terminal 3 (MR) Battery negative (-) - Terminal 9 (MF) | Forward position (A) | Moves from A to retracted position (E) |
| Battery positive (+) - Terminal 9 (MF) Battery negative (-) - Terminal 3 (MR) | Forward position (A) | Does not move |
| Battery positive (+) - Terminal 3 (MR) Battery negative (-) - Terminal 9 (MF) | Position in range (B) between forward position (A) and driving position (C) | Moves from position in range (B) to retracted position (E) |
| Battery positive (+) - Terminal 9 (MF) Battery negative (-) - Terminal 3 (MR) | Position in range (B) between forward position (A) and driving position (C) | Moves from position in range (B) to forward position (A) |
| Battery positive (+) - Terminal 3 (MR) Battery negative (-) - Terminal 9 (MF) | Driving position (C) | Moves from C to retracted position (E) |
| Battery positive (+) - Terminal 9 (MF) Battery negative (-) - Terminal 3 (MR) | Driving position (C) | Does not move |
| Battery positive (+) - Terminal 3 (MR) Battery negative (-) - Terminal 9 (MF) | Position in range (D) between driving position (C) and retracted position (E) | Moves from position in range (D) to retracted position (E) |
| Battery positive (+) - Terminal 9 (MF) Battery negative (-) - Terminal 3 (MR) | Position in range (D) between driving position (C) and retracted position (E) | Moves from position in range (D) to driving position (C) |
| Battery positive (+) - Terminal 3 (MR) Battery negative (-) - Terminal 9 (MF) | Retracted position (E) | Does not move |
| Battery positive (+) - Terminal 9 (MF) Battery negative (-) - Terminal 3 (MR) | Retracted position (E) | Moves from (E) to driving position (C) |
| 2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH |
![]() |
Disconnect the mirror connector.
Apply battery voltage and check the operation of the mirror.
| Measurement Condition | Specified Condition |
| Battery positive (+) → Terminal 6 (MV) Battery negative (-) → Terminal 5 (M+) | Turns upward (A) |
| Battery positive (+) → Terminal 5 (M+) Battery negative (-) → Terminal 6 (MV) | Turns downward (B) |
| Battery positive (+) → Terminal 4 (MH) Battery negative (-) → Terminal 5 (M+) | Turns left (D) |
| Battery positive (+) → Terminal 5 (M+) Battery negative (-) → Terminal 4 (MH) | Turns right (C) |
![]() |
w/ Mirror Heater:
Measure the resistance according to the value (s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 2 (+) - 8 (-) | 65°C (149°F) | 4 to 12 Ω |
Apply battery voltage and check the operation of the mirror heater.
| Measurement Condition | Specified Condition |
| Battery positive (+) → Terminal 2 (+) Battery negative (-) → Terminal 8 (-) | Mirror becomes warm |
![]() |
w/ Retract Mirror:
For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror's movement.
| Measurement Condition | Mirror Position | Specified Condition |
| Battery positive (+) - Terminal 3 (MR) Battery negative (-) - Terminal 9 (MF) | Forward position (A) | Moves from A to retracted position (E) |
| Battery positive (+) - Terminal 9 (MF) Battery negative (-) - Terminal 3 (MR) | Forward position (A) | Does not move |
| Battery positive (+) - Terminal 3 (MR) Battery negative (-) - Terminal 9 (MF) | Position in range (B) between forward position (A) and driving position (C) | Moves from position in range (B) to retracted position (E) |
| Battery positive (+) - Terminal 9 (MF) Battery negative (-) - Terminal 3 (MR) | Position in range (B) between forward position (A) and driving position (C) | Moves from position in range (B) to forward position (A) |
| Battery positive (+) - Terminal 3 (MR) Battery negative (-) - Terminal 9 (MF) | Driving position (C) | Moves from C to retracted position (E) |
| Battery positive (+) - Terminal 9 (MF) Battery negative (-) - Terminal 3 (MR) | Driving position (C) | Does not move |
| Battery positive (+) - Terminal 3 (MR) Battery negative (-) - Terminal 9 (MF) | Position in range (D) between driving position (C) and retracted position (E) | Moves from position in range (D) to retracted position (E) |
| Battery positive (+) - Terminal 9 (MF) Battery negative (-) - Terminal 3 (MR) | Position in range (D) between driving position (C) and retracted position (E) | Moves from position in range (D) to driving position (C) |
| Battery positive (+) - Terminal 3 (MR) Battery negative (-) - Terminal 9 (MF) | Retracted position (E) | Does not move |
| Battery positive (+) - Terminal 9 (MF) Battery negative (-) - Terminal 3 (MR) | Retracted position (E) | Moves from (E) to driving position (C) |