Home › TRANSMISSION ยท EA64F MANUAL TRANSAXLE › DIFFERENTIAL CASE

DIFFERENTIAL CASE > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING


    C070822E03
  1. Using SST, remove the tapered roller bearing from the front differential case.

    SST
    09950-00020  
    09950-00030  
    09950-40011   (09957-04010)
    09950-60010   (09951-00560)



2. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING


    C090344E03
  1. Using SST, remove the tapered roller bearing from the rear differential case.

    SST
    09950-00020  
    09950-00030  
    09950-40011   (09957-04010)
    09950-60010   (09951-00490)



3. REMOVE FRONT DIFFERENTIAL RING GEAR


    C117489E01
  1. Put matchmarks on the front differential ring gear and front differential case.



    C117490
  1. Remove the 16 bolts.

  1. Using a plastic-faced hammer, tap out the front differential case.



4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN


    C117491E01
  1. Using SST and a hammer, unstake the staked part of the front differential case.

    SST
    09930-00010  

  1. Using a pin punch and hammer, tap out the straight pin from the front differential case.



5. REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT


    C117493
  1. Remove the No. 1 front differential pinion shaft from the front differential case.



6. REMOVE FRONT DIFFERENTIAL SIDE GEAR


    C083566
  1. Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front differential side gears and 2 front differential side gear thrust washers from the front differential case.

    HINT:
    Remove the 2 pinion thrust washers and side gear thrust washers while turning the front differential pinion.