Home › TRANSMISSION ยท EA64 MANUAL TRANSAXLE › DIFFERENTIAL CASE

DIFFERENTIAL CASE > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING


    C070822E03
  1. Using SST, remove the front differential case front tapered roller bearing from the front differential case.

    SST
    09950-00020  
    09950-00030  
    09950-40011   (09957-04010)
    09950-60010   (09951-00560)



2. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING


    C090344E03
  1. Using SST, remove the front differential case rear tapered roller bearing from the rear differential case.

    SST
    09950-00020  
    09950-00030  
    09950-40011   (09957-04010)
    09950-60010   (09951-00490)



3. REMOVE FRONT DIFFERENTIAL RING GEAR


    C117489E01
  1. Put matchmarks on the front differential ring gear and front differential case.



    C117490
  1. Remove the 16 bolts.

  1. Using a plastic-faced hammer, remove the front differential case.



4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN


    C117491E01
  1. Using SST and a hammer, unstake the staked part of the front differential case.

    SST
    09930-00010  

  1. Using a 5 mm pin punch and hammer, tap out the front differential pinion shaft straight pin from the front differential case.



5. REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT


    C117493
  1. Remove the No. 1 front differential pinion shaft from the front differential case.



6. REMOVE FRONT DIFFERENTIAL SIDE GEAR


    C083566
  1. Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front differential side gears and 2 front differential side gear thrust washers from the front differential case.

    HINT:
    While rotating the front differential side gears, remove the 2 pinions and 2 pinion thrust washers.