Home › BODY › EXTERIOR › NAME PLATE

NAME PLATE > REMOVAL

for Preparation Click here


HINT:
When removing the emblem and name plate, heat the vehicle body, back door outside garnish, emblem and name plate using a heat light.

Standard:
Item
Specified Condition
Vehicle body
40 to 60°C (104 to 140°F)
Back door outside garnish
20 to 30°C (68 to 86°F)
Emblem
20 to 30°C (68 to 86°F)
Name plate
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, back door outside garnish, emblem and name plate excessively.



1. REMOVE NO. 1 BACK DOOR EMBLEM ASSEMBLY (w/ Tire Carrier)


B131627E01
  1. Put protective tape around the emblem.

  1. Insert a piano wire between the vehicle body and emblem.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the emblem to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Remove the emblem.



2. REMOVE BACK DOOR NAME PLATE (w/ Tire Carrier)


B131628E01
  1. Put protective tape around the name plate.

  1. Insert a piano wire between the vehicle body and name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the name plate to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Remove the name plate.



3. REMOVE NO. 1 BACK DOOR EMBLEM (w/ Tire Carrier)


B130239E01
  1. Put protective tape around the emblem.

  1. Insert a piano wire between the vehicle body and emblem.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the emblem to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Remove the emblem.



4. REMOVE NO. 1 BACK DOOR NAME PLATE (w/o Tire Carrier)
  1. Put protective tape around the name plate.

  1. Insert a piano wire between the back door outside garnish and name plate.

    HINT:
    Be careful of the boss positions.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the name plate to the back door outside garnish.

    NOTICE:
    Be careful not to damage the back door outside garnish.



  1. Remove the name plate.


    B209168E01



5. REMOVE NO. 3 BACK DOOR NAME PLATE (w/o Tire Carrier)


B208946E01
  1. Put protective tape around the name plate.

  1. Insert a piano wire between the vehicle body and name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the name plate to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Remove the name plate.



6. REMOVE NO. 2 BACK DOOR EMBLEM (w/o Tire Carrier)


B208948E01
  1. Put protective tape around the emblem.

  1. Insert a piano wire between the vehicle body and emblem.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the emblem to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Remove the emblem.



7. REMOVE NO. 4 BACK DOOR NAME PLATE (for 4WD)
  1. Put protective tape around the name plate.

  1. Insert a piano wire between the vehicle body and name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the name plate to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.



  1. Remove the name plate.


    B208951E01



8. REMOVE FRONT FENDER NO. 1 NAME PLATE


B219555E01
  1. Put protective tape around the name plate.

  1. Insert a piano wire between the vehicle body and name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the name plate to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Remove the name plate.



9. REMOVE FRONT FENDER NO. 2 NAME PLATE

HINT:
Use the same procedure described for the front fender No. 1 name plate.