Home › BODY › EXTERIOR › BACK DOOR OUTSIDE GARNISH (w/ Tire Carrier)

BACK DOOR OUTSIDE GARNISH (w/ Tire Carrier) > INSTALLATION

for Preparation Click here



1. INSTALL UPPER BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY RH


B208687
  1. Install 6 new clips to the back door outside garnish.

  1. Attach the 6 clips to install the back door outside garnish.



2. INSTALL LOWER BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY RH


B208681
  1. Install 5 new clips to the back door outside garnish.

  1. Attach the claw and 5 clips to install the back door outside garnish.



3. INSTALL UPPER BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY LH


B208684
  1. Install 6 new clips to the back door outside garnish.

  1. Attach the 6 clips to install the back door outside garnish.

  1. Install the screw.



4. INSTALL LICENSE PLATE LIGHT ASSEMBLY (w/ License Plate Light)


B135719
  1. Install the light as shown in the illustration.

  1. Connect the connector.



5. INSTALL REAR FOG LIGHT ASSEMBLY (w/ Rear Fog Light)


B132932
  1. Connect the connector.

  1. Install the rear fog light with the 2 screws.



6. INSTALL BACK DOOR GARNISH COVER (for 1-piece Type)


B208325
  1. Attach the 2 claws to install the back door garnish cover.



7. INSTALL LOWER BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY LH
  1. Install new clips to the back door outside garnish.

  1. w/ License Plate Light:
    Connect the license plate light connector.

  1. w/ Rear Fog Light:
    Connect the rear fog light connector.

  1. Install the back door outside garnish.

    1. Attach the clips to install the back door outside garnish.



  1. Install the screw.


    B209954E02