GLOW PLUG > INSTALLATION |
| 1. INSTALL GLOW PLUG ASSEMBLY |
![]() |
Using a 10 mm deep socket wrench, install the 4 glow plugs.
| 2. INSTALL NO. 1 GLOW PLUG CONNECTOR |
![]() |
Install the glow plug connector with the 4 nuts.
Connect the wire harness with the nut.
![]() |
Install the 5 grommets.
| 3. INSTALL ENGINE COVER BRACKET |
![]() |
Install the engine cover bracket with the bolt and nut.
| 4. INSTALL NO. 1 ENGINE COVER |
![]() |
Detach the 4 clips and remove the engine cover.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |