GLOW PLUG > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 1 ENGINE COVER |
![]() |
Detach the 4 clips and remove the engine cover.
| 3. REMOVE ENGINE COVER BRACKET |
![]() |
Remove the bolt, nut and engine cover bracket so that the glow plugs can be removed in a later step.
| 4. REMOVE NO. 1 GLOW PLUG CONNECTOR |
![]() |
Remove the 5 grommets.
![]() |
Remove the nut and disconnect the wire harness.
Remove the 4 nuts and No. 1 glow plug connector.
| 5. REMOVE GLOW PLUG ASSEMBLY |
![]() |
Using a 10 mm deep socket wrench, remove the 4 glow plugs.