Home › ENGINE · 2AD-FTV › EMISSION CONTROL › AIR FUEL RATIO SENSOR (for DPF)

AIR FUEL RATIO SENSOR (for DPF) > INSPECTION

for Preparation Click here



1. INSPECT AIR FUEL RATIO SENSOR


    A206337E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (HAF2) - 2 (+B)
    20°C (68°F)
    1.8 to 3.4 Ω

    Text in Illustration 
    *1
    Component without harness connected
    (Air Fuel Ratio Sensor)

    HINT:
    The temperature indicated in "Condition" is the temperature of the air fuel ratio sensor.

    If the result is not as specified, replace the air fuel ratio sensor.