BLOWER UNIT > DISASSEMBLY |
| 1. REMOVE HEATER TO REGISTER DUCT ASSEMBLY |
![]() |
Detach the 7 claws and register duct.
| 2. REMOVE AIR FILTER CASE |
![]() |
Detach the 2 claws and remove the air filter case.
Remove the air filter.
| 3. REMOVE AIR INLET CONTROL SERVO MOTOR (for Manual Air Conditioning System) |
![]() |
Remove the 3 screws and air inlet servo motor.
| 4. REMOVE AIR INLET CONTROL SERVO MOTOR (for Automatic Air Conditioning System) |
![]() |
Detach the claws and lever.
![]() |
Remove the 3 screws and air inlet servo motor.
| 5. REMOVE BLOWER RESISTOR (for Manual Air Conditioning System) |
![]() |
Remove the 2 screws and blower resistor.
| 6. REMOVE BLOWER MOTOR |
![]() |
Remove the 3 screws and blower motor.