Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL BLOWER MOTOR


    E124285
  1. Install the blower motor with the 3 screws.



2. INSTALL BLOWER RESISTOR (for Manual Air Conditioning System)


    E124284
  1. Install the blower resistor with the 2 screws.



3. INSTALL AIR INLET CONTROL SERVO MOTOR (for Manual Air Conditioning System)


    E127459
  1. Install the air inlet servo motor with the 3 screws.



4. INSTALL AIR INLET CONTROL SERVO MOTOR (for Automatic Air Conditioning System)


    E124275
  1. Install the air inlet servo motor with the 3 screws.



    E127280
  1. Attach the claw to install the lever.



5. INSTALL AIR FILTER CASE
  1. Install the air filter.



    E124286
  1. Attach the 2 claws to install the air filter case.



6. INSTALL HEATER TO REGISTER DUCT ASSEMBLY


    E124273
  1. Attach the 7 claws to install the register duct.