BLOWER MOTOR > ON-VEHICLE INSPECTION |
| 1. INSPECT BLOWER MOTOR (for Automatic Air Conditioning System) |
![]() |
Disconnect the blower motor connector.
Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, and then check that the motor operates smoothly.
If the operation is not as specified, replace the blower motor.
| 2. INSPECT BLOWER MOTOR (for Manual Air Conditioning System) |
![]() |
Disconnect the blower motor connector.
Connect the positive (+) lead from the battery to terminal 2 and negative (-) lead to terminal 1, and then check that the motor operates smoothly.
If the operation is not as specified, replace the blower motor.